Log In / Register
Basket
Free delivery on orders over £75 ex VAT
Earn points with My City Plumbing Rewards
Free click & collect from branches nationwide
Buy now, pay later interest free
Hover Over to Zoom In
Description
Hager Sollysta is a white moulded wiring accessory range and it is one of the easiest on the market to install with the shallowest back projection offering more cabling space. Behind the faceplate terminals are faced in the same direction with lead-ins for wiring, backed off screws held captive to prevent loss, wire end stops and clear white labelling off a dark grey background.
- Fuse Rating is 3.15 A or 240VAC
- The sollysta USB socket has built in intelligent connection, enabling the socket to identify itself as the dedicated primary charger for the connected device allowing for maximum charging capacity and improved charging speeds
- In standby mode the power consumption is < 150 mW and the average current (rms) < 1 mA
- Can be installed in 35 mm back boxes where 25 mm back boxes are fitted and 10 mm spacer WMUSBS should be used
- The USB charger is protected against over current and short circuit conditions on the output by a non-replaceable fuse
- The USB socket comes with two charging ports capable of delivering a total maximum charging current of 2.4 A, This can be delivered to either port or divided between the two ports as required and controlled by the devices being charged, The ports are marked 5V equal to 2.4 A
Technical specification
Width146mmWaist Sizeaa69ci12gvTypeSocketSwitchedYesRangeSollystaProfileCurved EdgePack Quantity1Number of Gangs2MaterialUrea-formaldehydeInterior or Exterior UseInteriorInput Voltage250 VHeight86mmDepth39.1mmCurrent Rating13 AColourWhiteSupplier Part NumberWMSS82USBRange DescriptionSollystaBrand NameHager
Reviews
Help & Feedback
Chat With Us
Give Us Feedback