The Sollysta White Moulded wiring accessory range is one of the easiest on the market to install with the shallowest back projection offering more cabling space. Behind the faceplate the terminals face in the same direction with lead-ins for wiring, backed off screws held captive to prevent loss, wire end stops and clear white labelling off a dark grey background.
Twin Charging Ports: The USB Socket Comes With Two Charging Ports Capable Of Delivering A Total Maximum Charging Current Of 2.4A. This Can Be Delivered To Either Port, Or Divided Between The Two Ports As Required, And Controlled By The Devices Being Charged. The Ports Are Marked 5V ===2.4A
Intelligent Connection: The Sollysta USB Socket Has Built In Intelligent Connection, Enabling The Socket To Identify Itself As The Dedicated Primary Charger For The Connected Device Allowing For Maximum Charging Capacity And Improved Charging Speeds.
Standby Power: In Standby Mode The Power Consumption Is <150mW And The Average Current (rms) < 1 Milli Amp
Can Be Installed In 35mm Back Boxes. Where 25mm Back Boxes Are Fitted, 10mm Spacer WMUSBS Should Be Used
The USB Charger Is Protected Against Over-current And Short Circuit Conditions On The Output By A Non-replaceable Fuse. (i.e. The Product Will Fail Safe