Branch Locator
Blog
Toolbox
Favourites
Account
Basket
VAT:
Ex
Inc
How to Boost Your Home’s Water Pressure
Published: 21 Sep 2023 ・ Read time: 9 mins
Dealing with low water pressure in your home can be a daily frustration. We’ve all been there: standing in the shower with barely enough flow to rinse out shampoo, or waiting an age for the kitchen tap to fill a kettle. If your water pressure is too low, it’s more than just an annoyance, it’s a plumbing bottleneck.
In this handy guide, City plumbing shows you how to boost water pressure in your home, identify the common causes of low flow, and explore the best booster pumps and professional solutions to get your system back to peak performance.
What Causes Low Water Pressure?
Low water pressure in the UK is a common issue, often caused by a mix of internal plumbing faults and external supply factors. Here's a breakdown of how such issues impact a home:
1. Partially Closed Stopcock or Valves
This is the most common "quick fix." If your main internal stopcock (usually under the kitchen sink) or the external boundary valve isn't fully open, it restricts the volume of water entering the house. Even a slight turn can significantly drop the pressure at the tap.
2. Clogged or Corroded Pipes
In older UK properties with galvanized steel pipes, internal corrosion (rust) can build up over decades. This narrows the "bore" of the pipe, much like a clogged artery, reducing the flow. Similarly, limescale buildup in hard water areas can block pipework, showerheads, and tap aerators.
3. High Demand (Simultaneous Usage)
If your home has a direct feed system (common with Combi boilers), the pressure is shared across all outlets. If someone is running a bath while the washing machine is filling and a garden hose is on, the pressure will drop across the entire house.
4. Faulty Pressure Reducing Valve (PRV)
Some modern homes have a PRV installed to prevent high-pressure damage to appliances. If this valve fails or is set too low, it will artificially throttle your water pressure. Conversely, if you have a Pressure Regulator that has failed, it can cause inconsistent surges or a complete drop in flow.
5. Hidden Leaks
A sudden drop in pressure often signals a leak. If water is escaping from a burst pipe under the floorboards or in the service pipe leading from the street to your home, less water reaches your fixtures.
6. Supplier Issues & Shared Communication Pipes
In many older terraced or semi-detached UK homes, several houses share a single "communication pipe" from the main road. If your neighbors are using a lot of water at the same time, your pressure will dip. Additionally, the water provider may occasionally lower pressure during maintenance or peak periods.
DIY Tips: Quick Fixes You Can Do Now
Before spending money on a plumber, check these common "low-hanging fruit" issues.
- Check the Stopcock: Ensure your main internal stopcock (usually under the kitchen sink) is fully open. Turn it clockwise to close it, then fully anti-clockwise to open, then back a quarter turn to prevent it from seizing.
- The "Litre Jug" Test: To see if your pressure is actually low, time how long it takes to fill a 1-litre jug from the kitchen tap. If it takes more than 7 seconds, your pressure is below the recommended 9–10 litres per minute.
- Clean Aerators and Showerheads: Unscrew the tips of your taps (aerators) and remove your showerhead. Soak them in white vinegar for an hour to dissolve limescale. A blocked mesh is a very common cause of "localised" low pressure.
- The Neighbour Check: Ask your neighbours if they are experiencing the same issue. If they are, it’s likely a problem with the water main or a burst pipe in the street, which means you should contact your water supplier (e.g., Thames Water, United Utilities) rather than a plumber.
- Check for "Leaky Loos": A leaking toilet cistern can silently waste hundreds of litres a day and drop pressure elsewhere. Place a dry sheet of toilet paper at the back of the toilet bowl; if it gets wet without flushing, you have a leak.
Professional Tips: When to Call a Plumber
If the DIY checks don't work, the issue is likely structural or mechanical.
- Install a Mains Booster Pump: If your incoming mains pressure is legally "fine" (1 bar) but feels weak for your needs, a plumber can install an inline booster pump like the Salamander HomeBoost. These are designed to safely pull more water from the main (up to the legal limit of 12 l/min).
- Unvented Cylinder Upgrade: If you have an old gravity-fed system (tank in the loft), a plumber can upgrade you to an unvented hot water cylinder (like a Megaflo). This uses the mains pressure directly, giving you "power shower" performance without a noisy pump.
- Replace Clogged Pipework: In older UK homes with galvanized steel pipes, internal rust can narrow the pipe to the size of a straw. A professional will need to "re-pipe" sections of the house with modern copper or PEX tubing.
- Fix a Faulty Pressure Reducing Valve (PRV): If your home has a PRV (often near the stopcock) that has failed, a plumber can replace or recalibrate it to ensure it isn't over-restricting your flow.
Moving Beyond DIY: Expert Plumbing Upgrades for Better Flow
When DIY fixes like cleaning showerheads or checking stopcocks don't solve the problem, it's time to consider a professional plumbing upgrade. Depending on your home’s layout and the severity of the pressure issue, one of the following solutions from City Plumbing can provide a permanent fix.
Install a Shower Pump or Power Shower
If the rest of your house is fine but your shower feels like a "disappointing trickle," you likely have a gravity-fed system where the water tank isn't high enough to create natural pressure.
- The Solution: Shower Pumps: These are installed tucked away in an airing cupboard. A Salamander CT50 Xtra or a Stuart Turner Monsoon pump can double or triple the force of your water.
Power Showers: Unlike electric showers that heat water on demand, a Power Shower (like the Mira Vigour) uses a built-in internal pump to boost the flow from your existing hot and cold water tanks.
- Best For: Gravity-fed systems where you only want to improve the showering experience.
Whole-House Booster Pump
If you find that your kitchen tap, garden hose, and upstairs bathroom are all suffering from weak flow, a whole-house solution is required.
- The Solution: Mains Boosters: Products like the Salamander HomeBoost are designed to sit directly on your incoming mains pipe. It intelligently monitors flow and kicks in to boost it up to the legal limit of 12 litres per minute.
Quiet & Compact: These are designed to be quiet enough to sit under a kitchen sink and are WRAS-approved for UK mains connections.
- Best For: Homes with low incoming mains pressure or Combi-boiler systems that struggle to keep up.
Upgrade to an Unvented System
For the ultimate performance upgrade, especially in larger homes with multiple bathrooms, you might consider moving away from "gravity-fed" tanks entirely.
- The Solution: Replace your old copper cylinder and loft tanks with an Unvented Hot Water Cylinder (such as a Megaflo).
- How it works: These systems take water directly from the mains and keep it under pressure. This means your hot water will come out at the same high pressure as your cold mains, providing "power shower" performance at every tap without the need for noisy pumps.
- Best For: Modernising older homes or supporting high-demand households with 2+ bathrooms.
Choosing the Right Solution with City Plumbing
Ultimately, when dealing with low water pressure it's a process of narrowing down whether the fault is a simple blockage, a mechanical failure, or a limitation of your home’s plumbing system.
Your Action Plan:
- Start with the Basics: Check that your stopcock is fully open and clear any limescale from your showerheads and tap aerators.
- Identify the Scope: If the issue is restricted to one room, it’s likely a local blockage. If it’s house-wide, it’s either an issue with the mains supply or your internal pipework.
- Choose Your Upgrade:
For a single weak shower, a shower pump is a cost-effective fix.
For a whole-house boost, an inline mains pump provides an immediate lift.
For a long-term, high-performance solution, upgrading to an unvented system will provide the best results for modern living.
Whether it’s a quick DIY fix or a professional system overhaul, restoring your home's water pressure is one of the most impactful ways to improve your daily routine.
Head to your local City Plumbing branch today, or visit our website for more products and helpful advice.
Help & Feedback
Chat With Us
Give Us Feedback