Designed, manufactured and assembled in the UK by John Guest Speedfit, this stem elbow is a plastic push-fit fitting for connecting the plastic and the copper pipes. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. It is suitable for hot and cold water and central heating systems. Note: with all plastic pipes the relevant manufacturers pipe insert is required. Protect from sunlight and frost.
BSI, BBA and WRAS approved
Conforms to ISO 14001 and accredited by British Gas Service and Energy Savings Trust
Assessed by B.S.I. to BS EN ISO 9001
Kitemarked to BS 7291 Part 1 2 and 3 Class S licence no. KM39767
Installation time can be reduced by around 40 percent against traditional fixing methods
Easy to use in confined spaces and removes the need for hot works on site
Lead-free, non-toxic, no scale build-up and corrosion free
Truly demountable without damage to pipe or fitting
No tools required
Suitable for use with pex, CPVC and copper pipe
Made To Order
Manufacturer Model No
One or more item(s) in your basket aren't available for delivery to
Unfortunately, we were unable to find any substitute items to replace them with. To continue with the order we will have to remove them from your basket.
If you would like to prevent any changes, press cancel.