Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' that inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. Two types of pipe inserts are available: Standard and Superseal. The Superseal insert contains two 'o' rings to provide even greater sealing security. Both types of inserts are suitable for JG Speedfit hot and cold water and heating systems. However, should an installation be required using a compression fitting, a TSM standard insert must be used. To be used when connecting Speedfit pipe to a Speedfit fitting or connecting Speedfit pipe to a compression fitting. Note: inserts must be used on all Speedfit connections. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Fast and simple to install, no tools required
MDPE push-fit connection
Pipe insert must always be used with MDPE Speedfit pipe
Lead free, non-toxic and will not support biological growth
Designed, manufactured and assembled in the UK by John Guest
Manufacturer Model No
Plastic Plumbing and Heating
One or more item(s) in your basket aren't available for delivery to
Unfortunately, we were unable to find any substitute items to replace them with. To continue with the order we will have to remove them from your basket.
If you would like to prevent any changes, press cancel.