This versatile system has the ability to differentiate between call point or detector alarm; can accommodate a maximum of 32 devices per zone; has separate fault monitoring display for each zone; and a man walk test facility and zones that can be configured without the need to use resistors or capacitors.
Two wire installation – only one circuit per zone to connect detectors and sounders – installation savings can be as high as 40%
Call point identification
Built-in end-of-line all devices – No resistors or extra circuits are required
7 modes of detection
Complies to BS5839 and EN54
Up to 32 devices per zone
Easy to install
Up to 72 Hour standby capacity
Warning of head contamination, before going into false alarm
Manufacturer Model No
Next Day Delivery
One or more item(s) in your basket aren't available for delivery to
Unfortunately, we were unable to find any substitute items to replace them with. To continue with the order we will have to remove them from your basket.
If you would like to prevent any changes, press cancel.